Dillon XL 650

From Wiki
Jump to navigationJump to search

Press Configuration

Case Prep

  • Shell Sorter (<ss cell="a1" value="38.95" show="$%.2f" /><ss cell="b1" value="9.00" />, The Shell Sorter)
  • CV-750 Vibratory Case Cleaner (<ss cell="a2" value="129.95" show="$%.2f" /><ss cell="b2" value="0.00" />, BrianEnos.com)

Full Length Case Sizing

  • Lee Classic Cast Single Stage Press (<ss cell="a3" value="85.99" show="$%.2f" /><ss cell="b3" value="11.99" />, Midway #317831)
  • "Gizmo" Full Length Case Sizing Die (<ss cell="a4" value="74.95" show="$%.2f" /><ss cell="b4" value="0.00" />, Target Arms, P.O.Box 326, Grand River OH 44045, jnighthawk@sbcglobal.net (check or Postal M.O.))

Press

  • Dillon 650 (<ss cell="a5" value="529.95" show="$%.2f" /><ss cell="b5" value="0.00" />, BrianEnos.com)
  • "As It Should Be" Upgrade (<ss cell="a6" value="116.19" show="$%.2f" /><ss cell="b6" value="0.00" />, BrianEnos.com) [1]
    • 650 Strong Mount
    • Bullet Tray
    • Aluminum Roller Handle
  • XL 650 Casefeed Assembly, Pistol, Large (<ss cell="a7" value="209.95" show="$%.2f" /><ss cell="b7" value="0.00" />, BrianEnos.com)
  • Primer Flip Tray (<ss cell="a8" value="16.95" show="$%.2f" /><ss cell="b8" value="0" />, BrianEnos.com)
  • 4-Pack Pickup Tubes, Large Primer (<ss cell="a9" value="19.95" show="$%.2f" /><ss cell="b9" value="0.00" />, BrianEnos.com)
  • Toolholder w/ Wrenches (<ss cell="a10" value="26.95" show="$%.2f" /><ss cell="b10" value="0" />, BrianEnos.com)
  • 650 Maintenance/Spare Parts Kit (<ss cell="a11" value="33.95" show="$%.2f" /><ss cell="b11" value="0.00" />, BrianEnos.com)
  • Low Powder Sensor (<ss cell="a12" value="40.95" show="$%.2f" /><ss cell="b12" value="0" />, BrianEnos.com) [2]
  • Precision Powder Baffle (<ss cell="a26" value="6.95" show="$%.2f" /><ss cell="b26" value="0.00" />, UniqueTek T1278)
  • Light-Load Shell Plate Illuminator (<ss cell="a13" value="8.95" show="$%.2f" /><ss cell="b13" value="10.00" />, UniqueTek T1255)
  • CNC Machined Dillon Clamped 650 Toolhead (<ss cell="a14" value="34.95" show="$%.2f" /><ss cell="b14" value="0.00" />, UniqueTek T1333) [3]

Dies

  • EGW Undersize Resizing Die (<ss cell="a15" value="30.00" show="$%.2f" /><ss cell="b15" value="4.99" />, Hennings)
  • EGW Replacement Decapping Pin (<ss cell="a16" value="5.00" show="$%.2f" /><ss cell="b16" value="0.00" />, Hennings)
  • Lee Factory Crimp Die, 45 ACP (<ss cell="a17" value="15.49" show="$%.2f" /><ss cell="b17" value="0.00" />, Midway #716704)
  • Redding Competition Bullet Seating Die (<ss cell="a18" value="64.95" show="$%.2f" /><ss cell="b18" value="0.00" />, UniqueTek T1282)

Misc

  • Case Gage, 45 ACP (<ss cell="a19" value="12.95" show="$%.2f" /><ss cell="b19" value="0.00" />, BrianEnos.com)
  • RCBS Bullet Puller (<ss cell="a20" value="17.99" show="$%.2f" /><ss cell="b20" value="0.00" />, Midway #630146)
  • Dillon Case Lube (<ss cell="a21" value="8.95" show="$%.2f" /><ss cell="b21" value="0.00" />, BrianEnos.com)
  • Powder Scale (best: $199.95, UniqueTek T1251, ok: <ss cell="a22" value="59.95" show="$%.2f" /><ss cell="b22" value="0.00" />, UniqueTek T1250) [4]
  • Case Cleaner Timer ($24.95, UniqueTek T1263 (A Woods 59377 on Amazon for $17.50 is the same item)) (not included in total)

Press Options

  • Micrometer Powder Bar Kit (Pre-installed) (<ss cell="a23" value="75.95" show="$%.2f" /><ss cell="b23" value="0.00" />, UniqueTek T1231) [5]
  • Mr. Bullet Bullet Feeder (<ss cell="a24" value="550.00" show="$%.2f" /><ss cell="b24" value="30.00" />, Dawson Precision)
  • Powder Check System (<ss cell="a25" value="65.95" show="$%.2f" /><ss cell="b25" value="0" />, BrianEnos.com) [6]

Items By Vendor

Hennings

  • EGW Replacement Decapping Pin (<ss cell="a16" show />, Hennings)
  • EGW Undersize Resizing Die (<ss cell="a15" show />, Hennings)

The Shell Sorter

Target Arms

  • "Gizmo" Full Length Case Sizing Die (<ss cell="a4" show />, Target Arms, P.O.Box 326, Grand River OH 44045, jnighthawk@sbcglobal.net (check or Postal M.O.))

Midway USA

UniqueTek

Dawson Precision

Brian Enos

Spending By Vendor

Vendor Items Shipping Total Item Count
Hennings <ss cell="c1" calc="a15+a16" show="$%.2f" /> <ss cell="d1" calc="b15+b16" show="$%.2f" /> <ss cell="e1" calc="c1+d1" show="$%.2f" /> 2
The Shell Sorter <ss cell="c2" calc="a1" show="$%.2f" /> <ss cell="d2" calc="b1" show="$%.2f" /> <ss cell="e2" calc="c2+d2" show="$%.2f" /> 1
Target Arms <ss cell="c3" calc="a4" show="$%.2f" /> Free <ss cell="d3" calc="b4" /> <ss cell="e3" calc="c3+d3" show="$%.2f" /> 1
Midway USA <ss cell="c4" calc="a17+a20+a3" show="$%.2f" /> <ss cell="d4" calc="b17+b20+b3" show="$%.2f" /> <ss cell="e4" calc="c4+d4" show="$%.2f" /> 3
UniqueTek <ss cell="c5" calc="a13+a14+a23+a22+a18+a26" show="$%.2f" /> <ss cell="d5" calc="b13+b14+b23+b22+b18+b26" show="$%.2f" /> <ss cell="e5" calc="c5+d5" show="$%.2f" /> 6
Dawson Precision <ss cell="c6" calc="a24" show="$%.2f" /> <ss cell="d6" calc="b24" show="$%.2f" /> <ss cell="e6" calc="c6+d6" show="$%.2f" /> 1
Brian Enos <ss cell="c7" calc="a21+a19+a8+a9+a10+a11+a12+a6+a2+a7+a5" show="$%.2f" /> Free <ss cell="d7" calc="b21+b19+b8+b9+b10+b11+b12+b6+b2+b7+b5" /> <ss cell="e7" calc="c7+d7" show="$%.2f" /> 12
Total <ss cell="c8" calc="c1+c2+c3+c4+c5+c6+c7" show="$%.2f" /> <ss cell="d8" calc="d1+d2+d3+d4+d5+d6+d7" show="$%.2f" /> <ss cell="e8" calc="c8+d8" show="$%.2f" /> 26

Notes

  1. 1.0 1.1 If going straight to Mr. Bullet Feeder, purchase the 650 strong mount and roller handle individually and save $32.29.
  2. 2.0 2.1 The low powder sensor is optional, but with the case feeder and bullet feeder, it's a lot easier to notice you've run dry than it is on a RL 550B. This is a good option.
  3. 3.0 3.1 Be sure to specify -6C for the 650 clamped tool head
  4. 4.0 4.1 The T1251 scale is actually a My Weigh GemPro-250, and can be found for around $170
  5. 5.0 5.1 Specify small powder bar for pistol (3-20 grains)
  6. 6.0 6.1 The powder check system is mutually exclusive with Mr. Bullet Feeder, and is not included in pricing totals. Add this if you don't plan on getting a bullet feeder.

See Also